OEM Part Number Cross References:
Compatibility:
| Manufacturer | Model |
| Draeger | Infinity Delta, Infinity Gamma, Infinity Kappa, Infinity Vista, SC 6000, SC 7000, SC 8000, SC 9000 |
Equipment: * Connect the sensor cable to the appropriate device (pulse oximeter) * Turn on the device and check correct operation by consulting the monitor's operating instructions. *To ensure proper operation of the monitor, please connect and disconnect the sensor cable from the monitor cable. Use correctly and safely
The sensor and its connecting cable require system inspection at least once or more per month, depending on frequency of use and sanitization of the cable *Visual inspection (appearance of insulator, connector contact pins, etc.) *Verification of mechanical integrity of the connector Do not use and discard any sensor with mechanical or electrical defects. The operating conditions of the SpO2 sensor and its cable are as follows: *Ambient temperature: 0° to +40° C
*Relative humidity: 0 to 80%
*Atmospheric pressure: 860 to 1060 HPa For use of SpO2 sensors and their connecting cables in departments where compliance with sterility levels is required, Med Accessories recommends the following cleaning, disinfection or sterilization methods.
Reminder:
When selecting the SpO2 sensor, please consider the following points:
Compatibility with patient monitor socket: Ensure that the SpO2 sensor connector is compatible with the socket on your patient monitor. Check whether it requires a 5-pin or 6-pin connector to ensure a proper fit.
Patient terminal type: Determine whether the sensor uses snap or clip patient terminals. Choose the appropriate type based on your preference and the compatibility with your patient monitor.
Appropriate sensor for the intended user: Verify that the sensor is suitable for the intended patient population. Different sensors are designed for adults, neonates, or other specific age groups. Select the sensor that corresponds to the specific patient category to ensure accurate readings and proper fit.
